Metal Additive Manufacturing Powders-depreceated
BPP is excited to expand our product offering to include Metal Additive Manufacturing Powders. We offer the widely used 718 (UNS N07718), Maraging Steel (18Ni 300, DIN 1.2709), 17-4 PH (DIN 1.4542), UNS 31358, UNS N06225 (DIN 2.4856) and Stainless Steel.
– Particle size distribution 15 – 63 µm, please see Data Sheets for exact PSD and chemistries.
– 10 kg containers are in-stock and available for immediate delivery.
– Powders are suitable for: powder bed fusion (PBF), laser powder bed fusion (LPBF/LBF), selective laser melting/sintering (SLM/SLS) additive technologies.
Powder is produced on the latest atomization technologies and tested in-house by our partners. This ensures you only receive the highest quality powder for your metal AM production needs.
| UNS N60225DIN 2.4856 | Download Data Sheet | UNS N06625 is nickel based alloy, which can be hardened by solid solution strengthening mechanism. Parts made from UNS N06625 has combination of high tensile, creep and fatigue properties. Parts manufactured from UNS N06625 exhibit good oxidation resistance and corrosion resistance. UNS N06625 is widely used into aerospace, marine and oil & gas fields. |
| 17-4 PHDIN 1.4542 | Download Data Sheet | Parts made from stainless steel 17-4PH can be machined, spark-eroded, welded, micro shot peened, polished and coated if required. The proper hardness and mechanical properties of parts made by stainless steel 17-4PH can be achieved by solution annealing and aging treatments. Stainless steel 17-4PH is widely used as the structural material in aerospace, petrochemical, power plants and marine fields, due to its high tensile properties, toughness and corrosion resistance at service temperature below 300˚C. |
| Stainless Steel | Download Data Sheet | AM Stainless Powder Material is a precipitation hardening stainless powder suitable for parts where a good combination of strength and corrosion resistance is needed.The powder has chemical composition as below and is gas atomized through induction melting and atomization under inert to gas and later tested ensure the product quality.The powder is easy to print and works in most LPBF machines with low pre-heating.The material properties for the grade can be improved by heat treatment after printing and an ageing is recommended. An ageing at 500-550°C would give a hardness of about 48HRC. |
| UNS R31358 | Download Data Sheet | Cobalt Chrome UNS R31538 powder is a cobalt-chrome-molybdenum-based super alloy powder. Parts made from Cobalt Chrome UNS R31538 can be machined, spark-eroded, welded, micro shot peened, polished and coated if required. Parts made from Cobalt Chrome UNS R31538 are suitable for:· High mechanical properties at both ambient and elevated temperatures (500 – 1000 °C)· Good corrosion resistance |
| 718DIN 2.4668 | Download Data Sheet | UNS N07718 powder is a nickel-based super alloy powder. Parts manufactured from UNS N07718 can be hardened by precipitation strengthening heat treatments. UNS N07718 parts are widely applied into aerospace and oil & gas fields.Parts made from UNS N07718 are suitable for:· High tensile, fatigue and creep properties at both ambient and elevated temperatures· Good corrosion resistance |
| Maraging SteelDIN 1.2709 | Download Data Sheet | Gas atomized maraging steel 1.2709 has chemical composition corresponding to 18Ni 300 maraging steel. |
Request a quote for AM Powder
Feel free contact us to ask about other metal AM powder grades and AM services
All powder is in stock and available for immediate delivery.
IMPORTANT: Entries with * are mandatory.
You can always send us an email to place an order: sales.ampowder@buffaloprecision.com