A2 Cold Work Tool Steel precsion ground flat stock Drill Rod
Technical Data Sheet

A2 is a 1% carbon, 5% chrome, air-hardening tool steel. A2 is known as a versatile, general purpose grade. A2 has better resistance to abrasion and wear than the "S" series shock resisting tool steels and more toughness and impact strength than the "D" series wear steels. A2 is used for a wide range of tooling applications ranging from general purpose punches and dies to components for plastic injection molding.

Buffalo Precision Products Stocks the A2 grade of tool steel in both Precision Ground Drill Rod and Flat Ground Stock

D2 Cold Work Tool Steel precsion ground flat stock Drill Rod
Technical Data Sheet

D2 is a high carbon, high chromium, air-hardening tool steel. It was formulated to combine excellent abrasion resistance and air-hardening characteristics. D2 has become the tool and die standard against which other tool steels are measured for abrasion resistance, dimensional stability in hardening and air-hardening characteristics.

Buffalo Precision Products Stocks the D2 grade of tool steel in Precision Ground Drill Rod and will quote on Flat Ground Stock.

M2 High Speed Steel precsion ground flat stock Drill Rod
Technical Data Sheet

M2 is a general purpose molybdenum high speed steel. This grade is characterized by balanced combination of abrasion resistance, toughness and good red hardness. Due to its comparatively low carbon content, M2 has an excellent combination of toughness properties and abrasion resistance when properly hardened and tempered. M2 is used in a wide used for all kinds of cutting tool, knife and punch and die applications.

Buffalo Precision Products will quote on M2 products per your request.

O1 Oil Hardening Tool Steel precsion ground flat stock Drill Rod
Technical Data Sheet

O1 Tool Steel is a general purpose oil-hardening tool and die steel. Normal care in heat treatment gives good results in hardening and produces small dimensional changes. O1 has good abrasion resistance and sufficient toughness for a wide variety of tool and die applications.

Buffalo Precision Products Stocks the O1 grade of tool steel in both Precision Ground Drill Rod and Flat Ground Stock

S7 Shock Resisting Tool Steel  precsion ground flat stock Drill Rod
Technical Data Sheet

S7 is a shock-resisting tool steel with excellent impact properties. Because it is an air-hardening steel, it is safe and stable in heat treatment. S7's most important characteristic is its versatility. It is used widely for medium cold work tools and dies, for plastic-molding dies, shear blades, medium hot work dies, master hobs, and for component parts of many products. S7 is the benchmark shock resisting tool steel.

Buffalo Precision Products Stocks the S7 grade of tool steel in Precision Ground Drill Rod and will quote on Flat Ground Stock

W1 Water Hardening Tool Steel precsion ground flat stock Drill Rod
Technical Data Sheet

W1, water-hardening is a cold work tool steel. This steel grade depends on its relatively high carbon content for its useful properties. W1 Water Hardening is known for its easy machining characteristic, ability to develop a keen cutting edge, high surface case hardness, and its soft, ductile, inner core.

Buffalo Precision Products Stocks the W1 grade of tool steel in Precision Ground Drill Rod